KOULtools AN Hose Assembly Made Easy

Save Yourself
Pain and Frustration!
Get Your KOULtools™ Now!

 

Free CSS Menus Css3Menu.com

 
KOUL tools are also available from these locations

INTERNATIONAL ORDERS... PLEASE CLICK HERE



click for a larger view


EZ-ON HOSE PRESS

p/n 409

Introductory Price!
$250.00 ea kit

The Koultools™ EZ-ON Hose Press solves an age old problem. Installing push on fittings has been A nightmare to say the least. Boiling water, heat guns etc etc, you can forget about. The New EZ-ON Hose Press will install -4 thru -16 push-on hose onto the fittings in seconds. It is constructed of investment cast steel. A true piece of machinery. All components are fitted Into custom carrying case for safe storage and transportation. The tool is designed to Install push-on hose onto any angle fitting.



click for a larger view

SMALL KIT

p/n 468

$75.00 ea kit

The Small kit contains the capsules to install -4, -6, -8 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up the some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit in the funnel. The two spacers are used in some -6‘s and 8‘s. If the socket seems loose in the tool, use a spacer to tighten it up. In the small kit, only the Russell -4 needs a sleeve. Not for use with Teflon-style hose.



click for a larger view

LARGE KIT

p/n 1016

$90.00 ea kit

The Large kit contains the capsules to install -10, -12, -16 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. In the 1016  kit, all the -16’s except Russell’s require the sleeve and a rear spacer. See the instructions in the case for the proper spacer number. Most of the -10’s and 12’s* will use a spacer. Not for use with Teflon-style hose.

* -12 is a stainless washer.


Hot Rod Kit
click for a larger view

HOT ROD KIT

p/n 681

$80.00 ea kit

The Hot Rod kit contains the capsules to install -6, -8, -10 hose into their respective sockets. To accommodate all the different manufacturer’s fittings, spacers and sleeves are required to tighten up some of the sockets within the capsule. For the tool to perform at its best, the socket needs to be a snug fit into the funnel. Spacers are used in some -6‘s, -8‘s, and most -10's. If the socket seems loose in the tool, use a spacer to tighten it up. See the instructions in the case for the proper spacer number. Not for use with Teflon-style hose.


The Pro Combo
click for a larger view

THE PRO COMBO

p/n 416

$150.00 for BOTH
Pros need both kits to handle
all the hose sizes in a race car.
(Saves $15.00)

The Pro Combo is a special offer of BOTH the #468 and #1016 kits listed above. Pros need both kits to handle all the hose sizes in a race car. Ordering this combination will save $15.00. Not for use with Teflon-style hose.


KOUL Singles

 

-6 KOUL SINGLE $30
-8 KOUL SINGLE $30
-10 KOUL SINGLE $30


     + $7.50 S&H
 


 
KOUL Tools™ is a registered trademark of Koul Tools LLC, Lake Havasu City, AZ
Contact Koul Tools LLC at sales@koultools.com or call (928) 854-6706
©2013 KOULtools, LLC. All rights reserved.                                Website design by Frontline Graphics